Buy Cheap Dremel 568 Grout Removal Kit From Here Now!
For use on wall and floor grout. Multiple slide depth adjustment. 30 angle for controlled cutting. Guides 180 apart to keep bit centered between tiles. Includes solid carbide 1 16" grout removal bit.
Readmore
Technical Details
- Now grout removal is easy.- Easily screws on to the front of your DREMEL rotary tool
- Removes both wall and floor grout
- Includes No. 569 - 1/16-inch Carbide Grout Removal Bit
- For use with rotary tool models 275, 285, 395, 398 and 781
See more technical details
By Charles Vekert (Highland, MD USA)
I would recommend this attachment for anyone planning to remove grout. Some people have complained about its usefulness and the tendency for the bits to break. I think this complain is about the 1/16 inch bit. Any bit this small can break if too much pressure is used. In any case, these problems are mostly avoidable.
The first key point is to be slow and gentle, particularly with the 1/16 bit, which is the one I had to use since I was de-grouting mosaic tiles. Grinding up grout takes time and nothing Dremel makes is suitable for brute force. Start very slowly and gradually see how you can speed up without having to force the tool.
The second is to remember to NOT go back and forth. The abrading surface is the side of the bit and when you go forward you are pushing the point into the grout, which can snap the bit. Pull, lift, pull, lift. This takes a bit of concentration, since we are so used to back and forth motions.
The attachment is better than the bit alone, although you have to do corners without it. I suggest you leave them for last when you are familiar with the tool. There is a tendency without the attachment to bear down too hard with a naked bit and the guide tabs help keep you in the grout and off the tiles.
And buy an extra bit. This is a good SOP with any tool that has a small part, bulb, cutting edge etc. that can either break or wear out easily. (I didn't need mine.)
By P. Carberry (Boston, MA)
This little attachment saved me about 2 days of working on my hands and knees chiseling out my grout lines with a hammer and screwdriver.
Well worth the money!
By D. Sherry (NOVA)
Worked great and saved me a lot of time, but I found that it worked better without the plastic cover attached. I had really thin grout lines however I think the cover would be great for grout 1/8" or larger.
By Erol (Fairfield, CT USA)
I purchased this tool thinking that it would be faster than removing grout by hand. But it is not. It is extremely slow even with a full 1/8 inch carbide tip bit - not supplied. The included bit is even smaller. By hand, with a double bladed hand-held small grout saw I was able to remove 1/4 inch grout at a 3 feet per minute pace. With this tool, it takes ten times that.
In addition, the plastic base has two notches to guide the tool in the grout joint. But the grout grinds away these notches after about 10 minutes of work.
A completely ineffective tool! Sounds like a cool idea but a complete waste of money. Do yourself a favour and don't buy it.
By Rolfe J. Taylor (va)
like several reviewers, I found the bit useful for freehand removal of grout but the attachment is awkward
Images Product
Buy Dremel 568 Grout Removal Kit Now
Buy Dremel 568 Grout Removal Kit |
Cheap Dremel 568 Grout Removal Kit | Low Price Dremel 568 Grout Removal Kit | Best Dremel 568 Grout Removal Kit | Order Dremel 568 Grout Removal Kit | Good Dremel 568 Grout Removal Kit | Lowest Dremel 568 Grout Removal Kit | Save Dremel 568 Grout Removal Kit | Discount Dremel 568 Grout Removal Kit | Purchase Dremel 568 Grout Removal Kit | Shop Dremel 568 Grout Removal Kit | Buying Dremel 568 Grout Removal Kit | Where Dremel 568 Grout Removal Kit
0 comments:
Post a Comment